- Body is of brass construction and is designed to conform to BS EN 200
- Dual flow
- Supplied with metal backnuts
- Chrome plated to BS EN 248
- Product Type: Deck Mixer/Bridge Tap
- Finish: Chrome
- Primary Material: Brass
- Material Details:
- Plating Material:
- Resistance Type: Rust Resistant
- Mounting Location: Deck Mounted
- Number of Installation Holes: 2
- Number of Installation Holes (Integer): 2
- Spout Type: Gooseneck/High Arc
- Swivel Spout: Yes
- Maximum Flow Rate (Litres): 71.8
- Minimum Water Pressure (Bars): 0.2
- Water Saving: No
- Suitable Water Pressure: Low & High Pressure Systems
- Maximum Water Pressure (Bars): 8
- Instant Boiling Water Tap: No
- LED Light: No
- Spray Included: No
- Spray Type:
- Lock Technology:
- Spray Head Functions:
- Spray Function Activation:
- Pre-Rinse Spout:
- Compatible with a sprayer:
- Handle(s) Included: Yes
- Number of Handles: 2
- Handle Style: Cross
- Compatible Handle Part Number:
- Compatible Deck Plate Part Number: Not Applicable
- Waste Included: No
- Soap Dispenser Included: No
- Compatible Soap Dispenser Part Number: Not Applicable
- Water Filtration Included: No
- Supply Lines Included: No
- Type of Tap Tails Included:
- Hot Water Tank Included:
- Compatible Kitchen Sink Part Number: Not Applicable
- Power Supply Required: No
- Power Supply Unit Included:
- Cartridge Type: Ceramic Disk Cartridge
- Number of Turns: 1/2
- Plug Included: No
- Hard-wired Plug Type:
- Adapter Type:
- Style: Traditional
- Country of Origin: China
- Compatible Drain Assembly Part Number: Not Applicable
- Compatible Filtration System Part Number:
- Compatible Water Tank Part Number:
- Activation technology: No
- Sensor functions:
- Automatic Shutoff:
- Activation technology OLD: Handles
- Pieces Included:
- Product Care: Your fitting has a high quality finish and should be treated with care to preserve the visible surfaces. All surfaces will wear if not cleaned correctly, the only safe way to clean your mixer tap is to wipe with a soft damp cloth. Stains can be removed using washing up liquid. All bath cleaning powders and liquids will damage the surface of your fitting, even the non - scratch cleaners. Note: Never use abrasive detergents or Note: disinfectants or those containing alcohol, hydrochloric acid or phosphoric acid.
- CE Certified:
- ASME A112.18.2 Compliant:
- ASME A112.19.1 Compliant:
- ASME A112.19.2 Compliant:
- UL Listed:
- ADA Compliant:
- ASME A112.19.3 Compliant:
- ASSE 1001 Certified:
- WRAS Approved: No
- ASSE 1016 Certified:
- ISTA 1A Certified: No
- ISTA 3A or 6A Certified: No
- BS 476 Compliant:
- FIRA Certified:
- ISO 14000 Certified:
- GSA Approved:
- WEEE Recycling Required: No
- ISO 14001 Certified:
- ISO 9000 Certified:
- ISO 9001 Certified:
- California AB 1953 Compliant:
- NSF/ANSI 61 Certified:
- WQA Gold Seal Certified:
- CSA Certified:
- ASME A112.18.1 Compliant:
- CALGreen Compliant:
- cUL Listed:
- UL 1951 Listed:
- cUPC Certified:
- ASME A112.18.1/CSA B125.1 - 2018:
- UPC Certified:
- IAPMO Certified:
- Vermont Act 193 Compliant:
- Energy Policy Act 1992 Compliant:
- TÜV Rheinland Certified:
- Stiftung Warentest Note:
- Low Lead Compliant:
- Energy Star Compliant:
- Environmentally-Preferable or Lower Environmental Impact Certifications:
- Environmental Choice Program Certified:
- Environmental Product Declarations - GreenTag:
- SMaRT Certified:
- FISP Certified:
- GreenSpec:
- CPG Compliant:
- Blauer Engel:
- EPP Compliant:
- UKCA Marked: Yes
- General Product Safety Directive Compliant: Yes
- REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) Compliant: Yes
- UK Water Supply and Water Fitting Compliant: Yes
- TMV2 (Thermostatic Mixing Valve) Scheme Compliant: No
- Inlet connections: 1.27cm BSP
- Overall Tap Height: 34
- Overall Tap Width: 24
- Overall Tap Depth: 22.5
- Spout Reach - Front to Back: 20.5
- Spout Height - Top to Bottom: 28.9
- Overall Product Weight: 2.09
- Installation Hole Diameter: 3.6
- Maximum Deck Thickness: 4
- Maximum
